Spray Painting, Chester, PA: Tips and Mistakes to Avoid

June 2, 2020
Spray Painting, Chester, PA_ Tips and Mistakes to Avoid

Spray Painting, Chester, PA: Tips and Mistakes to Avoid

Do you want to paint a relatively large area quickly and efficiently? The paint spray gun can be an ideal ally in your work provided you know how to use it properly.

In this article, we want to share some tips on how to use a spray paint gun and mistakes to avoid.

Areas We Will Cover

What type of paint gun?
Surface preparation
The technique for spray painting
Spray paint a wall
Spray paint a ceiling
Cleaning a paint gun

Don’t be intimidated by the paint gun. It is quite possible to learn to handle it with ease, by following our advice and taking a little time to master the technique.

What Type Of Paint Gun Should You Use?

For DIY enthusiasts and for small painting work, it is recommended to use a low-pressure paint spray gun, which can be more easily handled than a high-pressure paint spray gun and which will not require the rental or purchase of a compressor.
As its name suggests, it is under the effect of pressure that the gun will spray the paint through a nozzle, to deposit it on a thin layer on the surface.

Surface Preparation

As spray paint can quickly cover a surface, it is advisable to protect with plastic sheeting all the spaces you do not want to paint, such as furniture, windows, floor, doors as well as sockets and switches.

You will also need to wear a mask and goggles, as well as gloves to work safely.
Because the paint used must be particularly liquid, you will need to dilute it with water for acrylic paints and with white spirit for oil-based paints, following the instructions in the package.

How to Paint With a Paint Spray Gun

If a single coat is enough thanks to the high covering power of your paint sprayer, you have to put all the effort to get it right the first time.
Note that you can alter the shape of the jet by rotating the crown and adjust the flow using the wheel. To paint with a spray gun, follow a constant lateral movement to the right and then to the left, about twenty centimeters from the surface, tilting your wrist so that the nozzle is always perpendicular to the wall.

Begin arm movement before you even spray and continue after stopping the gun to avoid overloading the paint.
Add on a possible second layer by moving the gun this time from top to bottom.
Do not hesitate to practice on a large box for example to take a maximum of insurance before starting.

Spray Painting a Wall

Start at the top of the wall, and still with a lateral movement, in cross passes, gradually paint towards the bottom of the wall. To paint an angle between two walls, you will move the gun vertically, from top to bottom.

Spray Paint a Ceiling

To paint your ceiling with a paint sprayer, you will need to use a stable step ladder to get closer to the surface.
It will certainly be a little sportier but you will keep the same lateral movement, this time placing the nozzle at 45 ° to the ceiling.
Paint section by section before moving the stepladder to be always well positioned.

How to Clean a Paint Gun?

Remember to immediately clean your paint spray gun after use by disassembling it and rinsing it with clean water.
Then fill it with water and spray until the water becomes clear, before emptying and letting it dry.

Need Some Help with that?

If you don’t have the painting and design skills and experience required to paint your interior, consider hiring a professional painting contractor in West Chester, PA, like Left Moon Painting.

We have years of experience offering residential repainting services in Kennett Square, PA, and West Chester PA.

If you would like to try us, request a FREE estimate below to get started or call us at (484) 757-5295 for more information.

Related Posts: 



Get a FREE Quote

Request an Online Quote

Or Call: (484) 757-5295

Skip to content