Tricks for Painting a Concrete Floor in Greenville, DE

Your floor might not be what you would think of as being a thing to paint, but if it’s a concrete floor there’s no reason that you have to leave it bare, as is.

However, you should be well aware of the fact that it’s not just like painting other surfaces — painting a concrete floor can be a bit more difficult, yet as long as you are prepared for it you should do well — and with a little help here, you can do even better.

With that being the case, let’s have a look at some tricks for painting a concrete floor and making it look its best.

1. Prepare The Surface

One thing that you’ll certainly want to do when you’re painting your concrete floor is to make sure that you have prepared the floor that is being painted.

With a surface like a concrete floor, you’re going to want to make sure that you have no cracks or other damage as it will preclude you from properly painting the floor — paint and primer alone won’t correct cracks in the floor.

As you are repairing the cracks in the floor, you will also want to make sure that you clean it — there are few things that are less pleasant than trying to paint over a dirty floor and imagining it will suddenly look nice and new just from painting it.

Clean it, repair the cracks, and of course be sure that you have a dry surface before you move onto the next step in the painting process.

2. Use The Appropriate Paint

There are of course many paints that you can use for an interior painting project, but not all of them are going to be right for your concrete floor painting project.

There are plenty of paints that might be perfectly fine for painting just about any other surface — but there are certain paints that are better for painting your typical concrete surface, which you will want to stick to in painting your concrete floor.

By making use of a paint that is meant for painting concrete, you will find that your paint will stay on the floor much better and will also look a lot better in the long run,

3. Apply Your Paint Correctly

Just because you have the right paint doesn’t mean that you are going to be applying it to your concrete floor correctly.

It bears looking into the paint that you get and seeing what paint brushes and roller that will work with the paint so that you can be sure that it will look right on your floor.

It’s essential that you put the paint and even the primer onto the floor in thinner coats, so that you don’t have uneven application of the paint anywhere — and that you allow paint and primer to fully dry before you move onto the next coat.

Doing this will help you to be sure that the paint that you next apply will go on nicely and that it will not remove any paint or primer from the concrete floor rather than getting a new coat of paint on the floor.

4. Seal The Paint Deal

Lastly, you should remember that after you have applied the last coat of paint and it has fully dried, you will want to apply a sealing coat and then to allow it to fully dry so that your floor will look its best.

Doing this will make sure that the floor lasts a long time and that you are protected from stains that could come to the floor over time.

Consider hiring a professional painting contractor in Kennett Square, PA like Left Moon Painting. We have years of experience offering residential repainting services in Kennett Square, PA. If you want to try us, request a FREE estimate below to get started, or call us at (484) 757-5295 for more information.

Related: Basement Painting On A Budget In Kennett Square, PA
Family Room Painting With Less Mess In Unionville, PA
Craft Room Painting On A Budget In Unionville, PA